Engineering Kits
IN STOCK
Please review the Kit Descriptions below
Click the Kit Number for Details
To Request your Kit, Click on "Select"
Kit	Kit Number	Kit Description
Expanded Cable & Suppressor Kit	0199000005	Contains a broad sampling of suppression cores to reduce conducted EMI over wires and cables.
	Select
61 & 31 Material Snap-It Kit	0199000017	Contains a range of parts for different cable diameters. Suppressor selection is suitable for high frequency (61 material) and low frequency (31 material) applications.
	Select
Chip Bead Kit	0199000018	Contains a number of different EIA size chip components with a range of impedance values and signal speeds. Also included is one of our chip arrays.
	Select
Shield Bead Kit	0199000019	Contains 28 different beads in three suppression materials, 73, 43 and 61.
	Select
Antenna/RFID Kit	0199000024	Contains a range of rods in three low losses, high Q materials, 78, 61 and 67 to cover frequencies from 10 kHz to 50 MHz.
	Select
Surface Mount Bead Kit	0199000025	Contains an assortment of surface mount beads for differential and common-mode applications in 73 material for < 50 MHZ, 43/44 material for 25-300 MHz and 52/61 material for 250-1000 MHz frequencies.
	Select
Wound Bead Kit	0199000027	Contains twelve wound beads in two suppression materials, 44 and 61, wound in several configurations.
	Select
Bead-On-Lead Kit	0199000028	Contains three parts each in three materials, 73, 43 and 61, for through hole applications.
	Select
52 Material Rod Kit	0199000029	Contains seven rod sizes intended for open circuit applications that require a ferrite material with high saturation and Curie temperature.
	Select
31 Material Snap-It Kit	0199000030	Contains a range of parts for different cable diameters. Suggested operating frequency 1-300 MHz.
	Select
43 Material Snap-It Kit	0199000031	Contains Snap-It assemblies suitable for the 25-300 MHz frequency range. Can accommodate cable diameters from 0.250 to 0.591 inches.
	Select
46 Material Core and Snap-It Kit	0199000032	Contains a selection of cable cores and Snap-Its in our economical 46 material. This material has similar performance to our 43/44 grade materials over the 25-300 MHz frequency range.
	Select
61 Material Snap-It Kit	0199000033	Contains a selection of 61 material Snap-Its. 61 material is our recommended material for suppressing conducted EMI over the 200-1000 MHz frequency range.
	Select
Multi-Aperture Core Kit	0199000036	Contains five sizes in four materials, 73, 43, 61 and 67. The 73, 43 and 61 material parts are suggested for suppression applications from 1-1000 MHz. The 61 and 67 material parts can be used in HF broadband and inductive designs from 1 MHz to 100 MHz.
	Select